Vigilant 36" Forklift Underside Ceramic Magnetic Sweeper VI36

Designed to attach to the underside of any indoor/outdoor forklift in minutes using rare earth magnet pods. The Vigilant will attach to any flat piece of steel underneath a forklift with 208lbs of combined holding force between the four quad rare earth magnet pods. The Vigilant ceramic forklift magnetic sweeper has a maximum pickup height of 3.25" so once the magnet is hung from your forklift at the recommended 1" inch – 2" inch sweeping height it will continuously collect metal debris as the forklift goes about its normal activities. The Vigilant magnet comes in either a 36" inch or 42" inch sweeping width, these sweeping widths were chosen to work under most indoor / outdoor forklifts. Sweeping height is adjusted using 550 paracord and cinch cleats to give a long range of adjustment. The Vigilant ceramic forklift magnetic sweeper is built out of strong aluminum with a heavy-duty PVC quick clean off sleeve that resists abrasion from any ground scrapes. The Vigilant magnet is also resistant to damage since it is mounted underneath the forklift so it can't get hit from the front or back and doesn't extend past the wheels so it can't get caught on the sides. Easily Attach the Vigilant Hanging Magnet to a Forklift The quad magnet pods on each corner of the Vigilant easily snap onto any flat steel surface on the bottom of your forklift. The magnets will be the most effective at holding the Vigilant magnetic sweeper to the forklift if the steel surface you are attaching it to is cleaned thoroughly and the magnet pods are positioned directly above the Vigilant so the cords holding the sweeper up are completely vertical. The vigilant magnetic sweeper hangs from the quadpods using 550 paracord, the cords can be pulled through the magnet pods and cinched using the attached rope cam cleats at the desired height. This video shows how it works when attached to the bottom of a forklift The Vigilant Magnet Mounted Forklift Magnetic Sweeper is a perfect solution for maintaining a clean and safe work environment without allocating additional labour to the cleaning effort. Mounting the Vigilant to a forklift that is working around your facility will continuously collect metal debris while the forklift goes about its normal tasks. Cleaning the magnet off regularly using the included quick clean off sleeve will give maximum magnetic pickup power and make sure that the Vigilant is collecting as much metal debris as possible throughout the day without missing anything. The Vigilant has a new quick clean off sleeve that can be released from one side of the sweeper using a built-in handle and is released by a spring-loaded knob pictured to the right. The clean off sleeve has ribs in the center and on either end which takes all collected debris with the sleeve when it is pulled off, see the video below for details. The Vigilant is suspended from of any forklift using four quad magnet pods that each have 4 rubber coated rare earth magnet pucks which can provide up to 52Lbs of holding force each (on 5/16" steel). This means that each pod will hold more than the entire weight of the Vigilant magnetic sweeper!

View the Spec Sheet for This Item

View the Operation Manual for This Item