Quantum 25" Rare Earth Magnetic Sweeper for Steel Shot - Continuous Discharge QU25

Magnetic Sweeper for Cleaning up Steel Shot After Surface Preparation The Quantum Shotblasting Clean-up Magnetic Sweeper is designed to be a perfect mix of power and maneuverability for cleaning up medium-large shotblasting operations. Super-Blue Rare-Earth magnets power the Quantum and can pull S550 shot out of cracks/control joints up to 1 ¾" inches deep. The Quantum also features the new clutched drive hubs and front caster wheel which allows the magnet to pivot in place while still driving the finned drum without having to lift the sweeper to make a turn. Super-Blue Rare-Earth magnets keep the weight of the sweeper down and gives uniform strength along the entire 25" inch sweeping width. Having a uniform magnetic field allows the operator of the sweeper to be sure that they are retrieving 100% of the shot as they sweep over any crack less than 1 ¾" inches regardless of where the crack is aligned on the magnet. Ripwhirl technology on the Quantum magnetic sweeper is what creates the efficiency gains over a standard flip-up style magnet. The finned PVC drum is driven by the non marking wheels and pulls all collected shot out of the magnetic field and deposits it into the 42lb capacity removeable debris tray. By keeping the magnet cleaned off continuously, the magnet can use all its power for pulling shot off the floor instead of using the power to hold the shot. Rare Earth Powered Shot Blasting Magnetic Sweeper The Quantum shotblasting clean-up magnetic sweeper is powered by Super-Blue Rare-Earth magnets, these magnets give an advantage over ceramic magnets in terms of both weight and outright power. The Quantum's magnets will pull more shot out of deeper cracks than the ceramic powered Gamma equivalent while weighing 36.3 Lbs less than the Gamma. Using a magnetic sweeper that has the Ripwhirl continuous discharge technology allows workers and the sweeper to constantly operate at 100% since the magnet is always getting cleaned by the finned PVC drum and not using power to hold on to shot. Having the maximum amount of pickup power always available ensures that users don't have to go over areas twice due to missed shot and the worker doesn't have to slow down their pace of sweeping since the faster the sweeper is pushed the faster the magnet is cleaned off. Unlike traditional flip up style magnets that lose power as you work which causes workers to have to slow down to ensure adequate pickup rate.

View the Spec Sheet for This Item

View the Operation Manual for This Item