Nomic 6" Underside Forklift Magnetic-Mount Magnetic Sweeper, Modular NO6

Designed to be completely concealed under your forklift where it cannot get damaged. The NOMIC easily mounts to the underside of your forklift with rare earth magnet tripods designed to swivel to attach to any metal curved or flat surface. 6 round rare earth pot magnets (3 per tripod), each with 13 lbs of holding force (that's 78 lbs of total holding force!) are used to hang the 3.5 lb NOMIC to any steel under surface including curved surfaces such as the counterweight on the rear of a forklift. Easily pin together multiple NOMIC sections to make a magnetic sweeper as large or small as needed making it one of the most versatile magnetic sweepers on the market. Allows 35 degrees of arc curvature so that multiple NOMIC units can form an arc to match the rear shape of your forklift. The Nomic is sold in individual 6" inch pieces but can connect using an easy pin together design. Although the Nomic is small, it still has great pick-up power allowing an operator to pick up a 2 ½" nail from 3 1/2 “off the ground. The 3.5 lb Nomic is suspended from 2 tripods. Each tripod contains 3 rare earth pot magnets which magnetically hold the tripod on the steel surface of the forklift which they are attached to. Each Pot magnet has 13 lbs of holding force. Therefore one tripod has a total of 3 x 13 lbs = 39 lbs of holding force. In the video to the left, see how easily just one tripod suspends a 25 lb weight. The NOMIC will pick up a 2.5" inch nail when the bottom of the magnet is 3.5" inches off the ground providing plenty of pickup power performance when operating on moving forklifts. To maximize performance, we recommend setting sweeping height at 1" to 2" inches. No tools needed for assembly or installation Fits underneath forklift so nothing sticks out to get damaged Durable Nylon Construction for severe abrasion resistance and long useful life Easy sweeping height adjustability with self tightening cord cleat Easily Mounts to underside of forklifts, vehicles, carts, dollies etc. Hangs from polyester paracords which allow the NOMIC to swing out of the way if the magnet hits anything on the ground If the magnet can't swing out of the way and the holding force of the rare earth pot magnets is overcome the magnet simply gets pulled off without damaging it or anything else. 3.5" inch maximum pickup height using a 2.5" inch nail Build the width you need by attaching them together. Connection Pin for attaching multiple units together allows you to get the exact right width for your forklift. Allows up to 35 degrees of adjustable arc curvature so that multiple NOMIC units can form an arc to match the rear shape of your forklift Permanently charged grade C8 magnets Rubber coated rare earth pot magnets won't slide on steel surfaces

View the Spec Sheet for This Item