Mammoth 68" Ultra-Heavy Duty Tow-Behind Magnetic Sweeper MA68

Alternating Pole Assembly for more Focused Power The Mammoth Magnetic sweeper is an ultra-heavy duty towable magnet built to collect any type of ferrous debris through off and on road terrains. The powerful magnet in the Mammoth was made to collect steel balls used in ball milling operations efficiently and quickly. This can be accomplished while utilizing the optional debris digging rake and grader attachments to both agitate metal out of the ground and groom surfaces into a smooth and uniform grade. The Mammoth magnet can collect an impressive amount of debris while moving at relatively high speeds and sweeping heights, this lets the operator set the magnet higher to avoid ground strikes while being confident that the mammoth is collecting any debris that it passes over. Remote controlled 12v hydraulics control the mammoth trailer height and magnet position. This lets operators raise or lower the trailer to adjust for terrain changes from the tow vehicle and empty debris from the sweeper with the press of a button. Steel abrasive balls are used by mining and ore refining facilities to process raw material into useable metallic ore. These balls get lost during processing and are very difficult to retrieve using most magnetic sweepers with any efficiency due to the cross-sectional ferritic composition being much less concentrated than standard metal debris like nails, screws, and bolts. The Mammoth magnetic sweeper was designed in coordination with our industry partners to accomplish this exact task. The alternating pole layout of the 12"x12" magnetic assembly allows for a more concentrated magnetic field within the 2" – 7“operating range which can pick up the steel abrasive material. The power of the Mammoth's magnet assembly enables collection of these steel balls while at speed, the clip below shows 100% pickup rate at 8kmh with the sweeper positioned 4.5" above the ground. At lower sweeping heights the speed can be increased while retaining the 100% pickup rate. Key Features Easily towed by a variety of vehicles Standard lights and fenders Standard 4 pin trailer light connectors 125lbs tongue weight Heavy Duty Construction of steel & stainless steel Remote controlled Hydraulic clean off feature Hydraulic + Mechanical height adjustment 12v 3000psi power pack 2" hydraulic cylinders to lift magnet & trailer Operators of the Mammoth magnetic sweeper can control most of the functions of the unit from inside of the tow vehicle, this allows more debris collection in less time by eliminating the need to exit the vehicle to clean off the debris from the magnet or adjust the height of the trailer for different terrain (Minimum sweeping height should still be set using mechanical stops). The Mammoth is loaded with helpful features to make debris and steel ball abrasive collection easy, but for proper operation some maintenance needs to be done Tire Pressure will affect how the Mammoth is towed, acting as its only suspension, the pressure should be checked prior to operation The Mammoth comes standard with lights and fenders, but it is not intended to be towed at high speeds and may become unstable at speeds greater than 50km/h (30mph). Included on-board charger should be used to keep the batteries topped up over the minimum 12.4-volt level. Hydraulic Oil level should be checked regularly Torque wheel lugs (180 ft-lb) Check remote control batteries Grader Attachment Benefits Levels yard and road surfaces that have potholes Fills trenches left by Debris Digging Rake Raises and lowers with remote control trailer height adjustment Replaceable blades and sturdy construction to prevent wear Can be hung out of the way when not needed Leaves uniform grade

View the Spec Sheet for This Item

View the Operation Manual for This Item