Defiant 36" Forklift Underside Rare Earth Magnetic Sweeper DE42

The Defiant Magnet Mounted Forklift Rare Earth Magnetic Sweeper attaches to the bottom of any forklift using 550 paracord and four Quadpod magnets with four rare earth pucks and 52lbs of holding force each. This setup allows for super-fast installation and easy height adjustment by pulling on paracord that gets locked by a cinch cleat. The permanently charged rare earth magnets inside the Defiant's heavy duty aluminum housing provide more holding power than a ceramic magnet so it can collect more debris before it needs to be cleaned . It will also pick up a 2.5" Inch 8 penny nail from 4" inches off the ground so at the recommended 1-2" inch sweeping height there is enough power to pull most debris types. When it's time to clear debris from the magnetic sweeper, the defiant comes with a durable PVC quick clean off sleeve that drops all collected debris into a pile by flipping the release and pulling on the handle. The Defiant Magnet Mounted Forklift Rare Earth Magnetic Sweeper attaches using 550 paracord and four rare earth Quadpods that can provide up to 52lbs of holding force each (on 5/16" steel). This allows you to hang the roughly 25lb Defiant from your forklift with 208lbs of combined holding force between the four Quadpods. Adjusting the sweeping height on the Defiant Magnet Mounted Forklift Rare Earth Magnetic Sweeper is accomplished by slipping the 550 paracord through the cinch cleat built into the Quadpods. The cleat allows paracord to slip through one way but not the other, this makes it simple to raise or lower the magnet by pulling on the cord or releasing the cinch cleat using the built in thumb ridge. The Defiant Rare Earth Magnet Mounted Forklift Magnetic Sweeper hangs between the wheels of the forklift so it can't be damaged from front end or rear end collisions. The 36" or 42" sweeping width allows the Defiant to fit under most indoor / outdoor forklifts without protruding out of the sides of the forklift, so it won't get caught when maneuvering in tight spaces. This slim design allows the forklift to perform its regular tasks without being impeded by extra length on either end while continuously collecting metal debris from around your facility's most travelled areas as the forklift works. The Defiant doesn't impede forklift performance even on very low electric forklifts, the Defiant is hung about 1.5" off the ground on this forklift and had no issues going over the steel ramp into the back of a trailer from the loading dock.

View the Spec Sheet for This Item

View the Operation Manual for This Item