APC-80HF, Professional 80-Amp Non-touch Pilot Arc Plasma Cutter, 1.5 inch Clean Cut, 80% Duty Cycle APC-80HF

APC-80HF is the newest model of the professional digital control plasma cutting machine with built-in advanced inverter technology. Its high-quality design was manufactured in accordance with industrial level standards. The machine has a high-cutting performance and is very user-friendly with a beautiful appearance and exquisite production technology. The instrument and air pressure regulator are installed inside the machine on the panel, making it more convenient and easier to use. The air filter is installed in the machine and is controlled automatically by a solenoid valve, which greatly improves the work efficiency. The normal cutting thickness of APC-80HF air plasma cutting machine is 1.2 inch, and the maximum cutting thickness is 1.5 inches. Features: APC-80HF incorporates the most advanced IGBT inverter technology and non-touch pilot arc cutting processes, resulting in excellent arc stability. The cutting effect is very ideal and can finish the work effortlessly and quickly, regardless if the material is very rough, rusty, greasy, dirty, spray painted, etc. The lightweight model design makes the machine very convenient to carry anywhere. APC-80HF can achieve perfect cutting, and the strength of its components makes it a reliable work tool for professionals or individuals. Can cut up to 1.2 stainless steel, alloy steel, low-carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes. APC-80HF is an intelligent power supply system. It can automatically detect the input voltage and automatically compensate the voltage, allowing you to use it easily at 200-250V. It is designed for demanding industrial work and construction as well as simple tasks around houses. With less work, you can get a better overall result with a sharper cut. 80% duty cycle can ensure long-term and efficient cutting. NPT 1/4 inch industrial D-type coupler can easily and quickly connect to the air compressor. Extending the power cord by 300 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. It is fully suitable for difficult operations in construction sites, ship docks, agricultural sites, and relatively remote areas. APC-80HF is designed with multiple safety and protection functions, such as automatic compensation for voltage fluctuations, over-heating protection, over-current protection, over-loading protection, plasma torch gun safety protection, etc. The fan with automatic temperature control allows the machine to run very quietly. Specifications: Type: Non-touch Pilot Arc Plasma Cutter Supply Power: AC 200-250V, 50Hz-60Hz, 1-Phase Rated Input Current: 67-Amp Cutter Current Range: 20-80 Amp Nominal DC Open Circuit Voltage: 265-Volt Output Voltage: 112-Volt Duty Cycle @ 104F(40c): 80% @ 80-Amp Efficiency: 85% Power factor: 0.93 Output Terminal Type: Direct Wire Cooling Method: Fan Air Cooled Gas Supply: Clean Dry Oil-Free Air Gas Pressure Range: 30-90 psi Recommended Gas Inlet Flow: 6.5scfm @ 90 psi Standard Severance Cutting Thickness: 1.2 in. Maximum Severance Cutting Thickness: 1.5 in. Movement Speed: 15.0 in./min @ 1.2 in. Thickness Net Weight: 29.0 lbs. Product Size: 20.0 x 8.7 x 15.7 in. Package Weight: 43.0 lbs. Shipping Size: 22.0 x 13.0 x 16.5 in. Package Included: APC-80HF Non-touch Pilot Arc Plasma Cutter Machine. AP-80 13-Feet / 80-Amp Plasma Torch Gun Assembly. Consumables: 2-Electrodes, 2-Shunts, 2-Bakelite Cups & Roller Guides. 10-Feet 300A Work Clamp Assembly, 35-50mm Lead Dines. Air Filter and Pressure Gage (Installed inside the machine). Owner's Manual.