1/4" - 28 NF 3-Flute, H3 Semi-Bottoming Series/List # 2096C Spiral Flute Tap MT3360932

HPT†- High Performance Tap†-Exotic Alloys Recommended for steels, steel alloys, stainless steels, titanium alloys, nickel and nickel base alloys, other exotic alloys and a wide variety of materials up to 32Rc hardness. Spiral Flute Tapsare designed to lift the chips out of the hole in blind hole tapping, eliminating chip evacuation problems which can result in damaged threads and broken taps. They will also bridge openings, keyways and other interruptions in the tapped hole. Semi-Bottoming Style(2-3 thread chamfer) allows threading close to the bottom of blind holes but cuts more efficiently than standard bottoming taps due to a slightly longer chamfer which distributes the cutting load over greater number of teeth. CNC Reduced Neck Designenhances chip evacuation and cutting fluid flow to the cutting teeth for reduced friction, heat and galling. Also reduces contact between the tap the work piece. P/M Powder Metallurgy High Speed SteelPremium Steel Engineered For:Hardness / Wear Resistance / Tool Life / Heat Resistance / Toughness and Strength / Performance under Difficult Cutting Conditions / Higher Cutting Speeds / Increased ProductivityCountry of OriginUSAWarning-Proposition 65- For Californian Users onlyWARNING: This product contains a chemical known to the State of California to cause cancer or Birth defects. For more information go towww.P65Warnings.ca.gov Thread Diameter Size (TDZ) 1/4" Thread Tolerance Class (TCTR) H3 Threads per Inch (TPI) 28 Tool Type High Performance Tap Thread Standard NF Chamfer Semi-Bottoming Overall Length (OAL) u200e2-1/2" Coating TiCN Thread Cutting Part Length (THL) 7/16" Flute Type Spiral Flute Count (NOF) 3 Style Semi-Bottoming Flute Helix Angle (FHA) 48 Degrees Measurement Type Fractional Applicable Material Super-Alloys / Titanium ToolTypeName Spiral Flute Taps Cutting Edge Material HSSPM Series/List # 2096C