1-3/16" Magnetic Drill Press for Tubes and Pipes 30mm with Gyro-Tec ECO-TUBE.30S+

The Euroboor ECO.TUBE.30S+ magnetic core drilling machine is suitable for both flat and pipe material. The TUBE.30S+ with patented shallow-field magnetic technology offers incredibly strong grip, even on steel as thin as 3 mm. This magnetic core drilling machine automatically pivots to conform to any pipe of ø 76.2 mm or larger. The magnet does not require electricity, so all the power goes to the motor. This offers increased safety as the drilling machine will not release from the target material in the event of an unintentional power loss. The oil lubracted gearbox and innovative electronics reduces the risk of damage of the machine, tool and workpiece. When the GYRO-TEC sensor detects any excessive vibrations or sudden displacement it will automatically shut off the machine. The contributes to the wellbeing of the user and the lifespan of the machine, it also avoids high maintenance costs. This machine features: High-accuracy capstan hub Direct spindle drive Integrated tool cooling and lubrication One-speed gearbox Additional features The magnets can be adjusted for the best position on round and flat surfaces Integrated slide for: High accuracy Enlarged lifecycle Minimal vibration Reversible handles which enable you to change the operation side of the feed handles in confined spaces The magnet does not require electricity, so all the power goes to the motor. This offers increased safety as the industrial magnetic drill will not release from the target material in the event of an unintentional power loss. Features: No electricity required for magnetic base No loss of magnetic grip due to unintentional power loss Powerful hold on a wide range of steel thicknesses, curved and flat No special attachments needed for flat or curved surfaces Highly stable wide stance Magnets allow the machine to swing away for hole inspection or debris removal while keeping position Case content 1 x TUBE.30 magnetic drilling machine 1 x IBC.K25 pilot pin 3 x handles 1 x hex key 2.5 mm 1 x hex key 3 mm 1 x hex key 4 mm 1 x hex key 5 mm 1 x lubrication system 1 x bottle (200 ml) of IBO.10 cutting oil 1 x adapter Weldon 50 mm (IBK.50) 1 x user manual 1 x safety ear protection 1 x safety goggles 1 x safety gloves

View the Spec Sheet for This Item

View the Operation Manual for This Item